6 Quick Ways To Make Your Decking Non

Slippery Decking

"Most plastic boards are smoother on top than composites, which have a rough texture to improve slip resistance," he says. To ensure safety, manufacturers of plastic and composite decking have started submitting products to slip-resistance tests set up by ASTM International. So far, however, a nationwide safety standard has not been established. "If you have any concern with slipperiness, go with a rough-textured composite," says Dr. Prabhat Krishnaswami, vice chair of an ASTM committee on plastic lumber standards. Paint on a marine-grade anti-slip decking product for wooden decks especially prone to becoming slippery.

This durable and low-maintenance composite material does not crack and rot and does not need paint after long-term use. This does not only apply with composite decking but also for other outdoor surfaces as well. During winter, when composite decking becomes wet, water can get into the crevices and grooves of the surface which hardens into ice.

How To Design Roof Decks For Kids

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

What Are The Pros And Cons Of Composite Decking?

You can probably do this on areas that constantly get wet, and has a tendency to get very slippery, such as near the edges of the pool. The most common reason why composite decking becomes slippery are different dirt and organic particulates that accumulates on the surface. These are algae or fungal growth, molds, or mildew, which can make the surface slippery. There’s lots of reasons why decking can become slippery, particularly in winter. The most obvious reason timber decking can become slippery is because it’s porous — this means water can collect in between the wood fibres.

One of my favorite mold, mildew, algae, and moss removers, is the Wet&Forget solution. It’s extremely effective at killing and removing all algae, mold, and more.

• This will clear away pretty much all of the dirt that has remained after brushing.
• Worries about the safety of wet decking are commonplace with both deck owners and people considering installing decking for the first time.
• Once you’ve done this, you should spray your deck with either a dedicated deck cleaning product or a solution of warm water and soda crystals to get it really clean.
• Thereafter it’s a good idea, if you have one, to clean the surface using a jet washer, set on a relatively gentle wash option.
• By carrying out this thorough cleaning process, ideally at the start or end of each season, you’ll be helping to keep your deck safer when it rains.

This will turn it into a hazardous mess, so it’s best to tackle this issue before it happens. To prevent this, simply clear out the spaces between decking boards to ensure they can drain properly. You can use a small putty knife or screwdriver between the boards to dislodge anything that might be filling up the spaces. Whenever the dirt and debris build up on your deck, these drainage spaces can fill up, preventing the water from draining properly. When this happens, you’ll get water pooling and excess moisture that can lead to a slick deck surface in the near future.

You simply paint them on like any other type of coating or paint. Shingles and rolled roofing both have a very rough surface that will provide plenty of traction.

Best Decking Reviews

I don’t think that an inch or two either way will make any structural difference. is tough for decks because it really does limit your options and often results in more spring/sag as time goes on. I have to span 24 inch centers on my deck and they seem to be the only company that will certify a 120 per square foot at that span. It is a fiberglass composite but I cannot find much information on them. The key to success is to use the proper product for what you are trying to do. The big box stores sell mid level products — “it’s the best we sell” . Cellular PVC decking with an ASA capstock is the best decking in the entire vinyl deck industry.

However, I wouldn’t recommend jumping to this solution first all the time. Pressure washing can actually damage your deck if done too much. This is best left for the major once or twice a year cleanings that will restore your deck to its former glory.

Like any stain or protection product, it’s essential, before applying non-slip coating to make sure your deck is completely clean, dry and free of all surface dust. Firstly it’s important to keep your decking as clean as possible to help stop fungus and mold from forming. In order to deep clean your decking, you should ideally remove all furnishings and plant pots so you can brush the whole surface with a stiff broom to get rid of surface dirt. Thereafter it’s a good idea, if you have one, to clean the surface using a jet washer, set on a relatively gentle wash option. This will clear away pretty much all of the dirt that has remained after brushing. Once you’ve done this, you should spray your deck with either a dedicated deck cleaning product or a solution of warm water and soda crystals to get it really clean. By carrying out this thorough cleaning process, ideally at the start or end of each season, you’ll be helping to keep your deck safer when it rains.

Which Is More Expensive Trex Or Azek?

When the threat of inclement weather has passed, use a broom to sweep up any existing granular pieces and discard the ice melt. This will prevent people and pets from unintentionally tracking in the ice melt that could damage your indoor flooring. Eugene has been a DIY enthusiast for most of his life and loves being creative while inspiring creativity in others.

How To Keep Composite Decking From Being Slippery

If your deck is getting too slippery, then one of the major culprits is moisture. As moisture accumulates on your deck, it creates the perfect breeding ground for algae, moss, mildew, and anything else that can grow and make your deck hazardously slick. It’s important that you have a completely clean and dry surface for the tape to stick to. Make sure you thoroughly clean the deck and allow it to dry before you attempt to apply anti-slip tape. One of my favorite non-slip paints is the INSL-X Sure Step.

They also provide plenty of traction, but they’re less permanent than the other solutions we’ve discussed. I prefer the EdenProducts Heavy-Duty Anti-Slip Traction Tape. It’s 80-grit, which will provide tons of grip and ensure that no one slips on your deck again. Just as importantly, it sticks extremely well and won’t fall off in a few days like other tapes.